10,000 Watt Automatic Propane/Natural Gas Generator

Visit my Store  8,000 Watt | 10,000 Watt | 17,000 Watt
     Yes! Send the 2014 Automatic Standby Generators Buyer's Guide


Name:
First
Last
Company:
Address 1:
Address 2:
City/Town:
State/Province:
Zip Code:
Telephone:
 


Our Reduced Price:$
View  
View  
View  
  

10,000 Watt Automatic Standby System - Starts automatically when your power fails and transfers your electrical loads to generator power. When utility power returns, the system transfers back to utility power and shuts off the generator.

Includes weather protective enclosure, composite mounting pad (for easier installation), flexible fuel line connector to your propane/natural gas pipe, automatic transfer switch with pre-wired 10 circuit load center and step-step installation guide with colored photographs.

Protect the things that matter most...with an automatic system.

This 10,000 watt generator features a 18 HP OHVI 530cc propane or natural gas engine, spin-on oil filter, low oil pressure shutdown, high water temperature shutdown, automatic voltage regulation, enclosed muffler, timed battery trickle charger and automatic 100 amp transfer switch with seven day exerciser, pre-wired conduits and built-in load center.







Generator
Automatic Voltage Regulator Standard
Main Line Circuit Breaker 35 Amps
Power Single-Phase ---
Maximum Output 10,000 watts
Continous Output 9,000 watts
Load Amperage at 120 volts ---
Maximum Load 83 Amps
Continous Load 75 Amps
Load Amperage at 240 volts ---
Maximum Load 41.5 Amps
Continous Load 37.5 Amps
Sound Level @ 23 ft(7 m) at full load 63 dB(A)



Engine
Type OHVI 530cc
Cylinder Block Aluminum w/ Cast Iron Sleeve
Power 18 HP
Cylinders 2
Electronic Governor Standard
Oil Capacity w/ Filter Approx. 1.7 Qts
Battery Requirement (Not Included) 12 VDC 350 CCA
Fuel Propane or Natural Gas
Cooling System Air-cooled
Starting System Electric



Consumption
Consumption at 1/2 load - cu.ft./hr (gal/hr) 46 (1.25)
Consumption at 3/4 load - cu.ft./hr (gal/hr) 62 (1.68)
Consumption at full load - cu.ft./hr (gal/hr) 70 (1.93)



Transfer Switch
Current Rating (Amps) 100
Voltage Rating (VAC) 250
Weekly Exercise Standard
UL Listed Standard
Pre-Wired Circuits MLS4-Y
15 Amp 120 V 5
20 Amp 120 V 3
20 Amp 240 1
30 Amp 240 1
Dimensions MLS4-Y
Height 26.5"
Width 12.5"
Depth 7"



Controls
Engine Warm-Up Standard
Engine Cool-Down Standard
Battery Trickle Charger Standard
Low Oil Pressure Shutdown Standard
High Temperature Shutdown Standard
Overspeed Shutdown Standard
Overcrank Protection Standard



Installation Data
Fuel Inlet Fitting 3/4" FNPT
Fuel Inlet Pressure Nat. Gas: 5-7"
Propane: 11-14"
Recommended Hose Size 3/8"
BTU Content 130,000 BTU
Flexible Fuel Line 1'-3/4" NPT Fitting
Recommended Clearances 5' - All Sides
Composite Mounting Pad Standard
No. of Conductors 4
Wire Size of Conductors No. 4 AWG
Length of Pre-Wired Cord from
Genset to External Connect Box
55"
External Connect Box
(L x D x W)
9-1/4" x 2" x 5"
Service Side
(Facing fuel inlet)
Left-Side
Exhaust Location & Direction
(Facing service side)
Left-Side
Air-Flow Direction
(Facing service side)
Inlet: Left-Side
Outlet: Right-Side
Battery Type 12 VDC - 350 CCA
Engine Oil Type 10w-30 Synthetic



Dimensions
Length 48 inches
Width 25 inches
Height 29 inches
Dry weight 375 lbs



   PRINTABLE VERSION


E-Mail Address:  



Central Maine Diesel
29 Carey Circle
Hampden, ME 04444

Phone: 1-207-941-1188
Fax: 1-207-941-1189
E-Mail: sales@generatorsales.com


Copyright 2014 Central Maine Diesel Inc. All rights reserved.